Celestron NEXSTAR 60SLT Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Monitore Celestron NEXSTAR 60SLT herunter. Celestron NEXSTAR 60SLT User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 4
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Extend tripod legs 6 to 8 inches by
loosening the tripod leg locking knob
and pulling the leg to desired length and
re-tightening knob.
Assemble tripod by spreading the legs
out until the center leg brace is fully
extended.
Item #31132
Quick Set-up Guide
1
2
3
All three legs should be the same length to
provide a level platform for the telescope. A
bubble level is included (inset) to assist in leveling.
4
7
Hold the telescope fork arm and place
the bottom of the base inside the tripod
mounting platform as shown.
Place accessory tray on top of center leg
brace by lining up the grooves on the
tray to the post on the brace.
5
Once grooves are aligned, turn accessory
tray until it snaps into the clips on each
leg brace.
6
Thread the coupling screw into
the hole at the bottom of the fork arm
base. Tighten screw to secure the
entire fork arm.
8
Slide the optical tube dovetail into the fork
arm as shown above.
9
NexStar 60SLT
Your NexStar 60SLT includes: optical tube;
fork arm; pre-assembled tripod;
computerized hand control; hand control
holder; star diagonal; two eyepieces;
finderscope; accessory tray; documentation
including an owner’s manual, The Sky® CD
and NSOL Telescope Control Software.
Item #22076
Coupling screw
Seitenansicht 0
1 2 3 4

Inhaltsverzeichnis

Seite 1 - NexStar 60SLT

Extend tripod legs 6 to 8 inches byloosening the tripod leg locking knob and pulling the leg to desired length andre-tightening knob.Assemble tripod b

Seite 2 - Quick Set-up Guide [cont]

Quick Set-up Guide [cont]Secure optical tube to fork arm bytightening the screw located on theinside of the fork arm assembly.11To attach the findersc

Seite 3 - Hand Control Guide

Hand Control Guide1Turn power switch (located on the side ofthe fork arm) to “on” position. The light willcome on and the hand control willdisplay “N

Seite 4 - .803.5955

Hand Control Guide [cont]If you have questions or problems with set-up, please contactCelestron Technical Support: 310.803.595516If the finderscope ha

Kommentare zu diesen Handbüchern

Keine Kommentare