Celestron 44340 Bedienerhandbuch PDF herunterladen (Seite 4)

Setting Up Your Microscope

1. Take the carrying case out of the cardboard carton.

2. Carefully remove the microscope and other parts from the carrying case and set them on a table, desk, or other flat surface.

3. Remove the dust cover from the microscope.

Figure 2

4. Plug the small cable from the AC adapter into the socket on the back of the base (see Figure 2 above).

5. Insert the plug end of the AC adapter into the proper power source.

Note: The AC Adapter supplied with this microscope has an interchangeable plug system that can work in the USA, UK,

Europe, Australia and many other parts of the world. The plug for the USA will be installed in the AC Adapter.

You can easily change plugs for your particular requirement by doing the following:

A. Push down on the small button labeled “PUSH” and hold it down while at the same time hold the prongs of the

plug and rotate it slightly counterclockwise and pull up to remove it. Then remove your finger from holding the

“PUSH” button down.

B. Take the plug style that you want to use and center it over the AC Adapter and rotate it until it falls down into the

opening. Then rotate it clockwise until you hear a click sound which lets you know the plug is now installed

correctly.

Microscope Operation

Before looking at specimens you must turn the LCD on, turn on the proper illumination, and understand how to use the

mechanical stage and then you are ready to begin viewing.

Figure 3

LCD Module

This digital microscope is different than traditional microscopes --- instead of using eyepieces to look at a specimen in a

traditional microscope, the LCD monitor replaces the eyepieces so you can look at the specimen on the screen by

yourself or share the views with others. To begin to view specimens with your microscope, you will have to turn the

LCD monitor on by turning the Power Button “On” (see Figure 3). Push and hold the button down until the green LED

comes on indicating the LCD monitor is “On.” That is basically all you need to do to use the LCD screen for viewing

specimens. The various keys on the LCD Module are mainly used for taking images (snapshots and video) and will be

discussed later in this manual.

Socket

AC Adapter

w/ USA Plug

Euro

e Plu

UK Plug

Direction/OK Ke

Monitor On Li

Power On/Off Button

ESC

(

Chan

)

Menu Ke

Snap Key

1 2 3 4 5 6 7 8 9 ... 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare

Celestron 44340 Bedienerhandbuch Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Mikroskope Celestron 44340